LITHIUM MOLYBDENUM GREASE 3% MOLY
PRODUCT DESCRIPTION
Lithium Molybdenum grease is based on lithium 12-Hydroxystearate soap and high-quality mineral base oil. The grease contains antioxidants, rust and corrosion inhibitors, extreme pressure, and anti-wear additives. The addition of molybdenum disulfide is providing extra protection against wear and shock loads. . This grease contains 3% of Molybdenum disulfide.
APPLICATION
Lithium molybdenum is a multi-purpose grease suitable for a wide range of applications. It can be applied to lubrication points found on dozers, scrapers, earthmovers, cranes, shovels, rollers, combines, and cotton pickers. These lubrication points include most types of antifriction bearing arrangements from plain sleeve-types to rolling element bearings, as well as bushings and other sliding surface or pivot point.
PRODUCT ADVANTAGES
- The presence of moly provides additional protection against wear
- Excellent load-carrying capacity
- Good resistance against water
- Good mechanical stability
- Good corrosion protection
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PARAMETERS | TEST METHODS | TYPICAL VALUE | |
|---|---|---|---|
| NLGI Grade | – | 2 | 3 |
| Thickener type | – | Lithium 12-hydroxystearate | Lithium 12-hydroxystearate |
| Appearance | Visual | Smooth & Homogenous | Smooth & Homogenous |
| Color | Visual | Dark gray | Dark gray |
| Work Penetration @25°C, | ASTM D217 | 265 – 295 | 220 – 250 |
| Copper Strip Corrosion 24hrs @100°C | ASTM D4048 | 1b max. | 1b max. |
| Dropping Point °C, Min | ASTM D566 | 180 | 180 |
| Water washout resistance %WT @79°C | ASTM D1264 | Max 10 | Max 10 |
| Four Ball, Load Wear Scar, Mm | ASTM D2266 | 0.6 | 0.6 |
| Four Ball Weld Load, Kgf, Min | ASTM D2596 | 200 | 200 |
| Dry Lubricant | – | Molybdenum Disulfide | Molybdenum Disulfide |
| Operating Temperature Range, °C | INTERNAL | -20 to 120 | |
| Base Oil Viscosity @40°C (Cst) | ASTM D445 | 90 -110 | 90 -110 |
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).