POLYUREA GREASE NLGI-1.5 Mineral oil based
PRODUCT DESCRIPTION
Polyurea Grease NLGI 1.5 is a high-performance extreme pressure (EP) grease designed to deliver enhanced lubrication in demanding industrial applications. Formulated for superior load-carrying capacity and thermal stability, it performs reliably in low to medium-speed bearings operating under heavy loads. This grease offers excellent resistance to high temperatures, oxidation, and wear, making it well-suited for continuous operations where consistent performance and long service life are critical. It is particularly effective in severe environments where slow-moving bearings are exposed to elevated temperatures and heavy-duty conditions.
APPLICATION
Polyurea Grease NLGI 1.5 is widely used for lubricating loaded low to medium-speed industrial bearings, especially in continuous steel casting lines. It is highly suitable for high-temperature, slow-moving concast bearings in the steel industry, as well as other industrial applications requiring reliable lubrication under heat and load. This grease ensures consistent performance, reduced wear, and extended equipment life in demanding operating environments.
PRODUCT ADVANTAGES
- The operating temperature range is -10°C to +150°C
- Outstanding high-temperature oxidation stability
- Good anti-corrosion properties
- Excellent resistance against water washout
- Long operational life
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PROPERTIES | TEST METHODS | TYPICAL VALUE |
|---|---|---|
| NLGI Grade | ASTM D217 | 1.5 |
| Thickener type | – | Di- Urea |
| Base Oil type | – | Mineral |
| Appearance | Visual | Smooth & Homogenous |
| Color | Visual | Light Brown |
| Worked Penetration, 0.1mm | ASTM D217 | 305 |
| Dropping Point, °C, Min | ASTM D2265 | 250 |
| Cu corrosion | ASTM D4048 | 1b |
| Four Ball Weld Load, Kgf | ASTM D2596 | min 250 |
| Emcor Rust Test, Rating | IP 220 | 0-0 |
| Heat Stability, %Wt | ASTM D6184 | 3 max |
| Operating Temperature Range °C | INTERNAL | -10 to 150 |
| Base Oil Viscosity @40°C (Cst) | ASTM D445 | 460 |
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).