LITHIUM EP GREASE NLGI 0,00,000,1,2,3
PRODUCT DESCRIPTION
Lithium EP Grease is a high-performance, multi-purpose extreme pressure (EP) lubricating grease formulated with lithium 12-hydroxystearate soap thickener and high-quality mineral base oils. It contains antioxidants, anti-wear additives, and rust and corrosion inhibitors to deliver excellent protection and long service life. This grease provides strong load-carrying capacity, good mechanical stability, and reliable resistance against wear, oxidation, and corrosion, making it suitable for a wide range of demanding industrial and automotive applications.
APPLICATION
Lithium EP Grease is widely used in centralized lubrication systems, particularly in NLGI 0 and NLGI 1 grades where good pumpability is required. It is suitable for steel mill applications, heavy-duty plain and rolling element bearings, and gearboxes requiring semi-fluid grease, especially under high loads and shock conditions. This grease is also commonly used in commercial vehicles and construction equipment for chassis joints, pins, and bushings. NLGI 3 grade is recommended for applications involving inclined or vertical shafts, even under severe vibration, ensuring reliable lubrication and equipment protection.
PRODUCT ADVANTAGES
- The operating temperature range is from -25°C to 130 °C.
- Excellent mechanical stability
- Easy to pump at low temperatures
- Excellent resistance against water
- Very good anti-wear protection
- Very good rust and corrosion protection
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PARAMETERS | TEST METHOD | TYPICAL VALUE | |||||
|---|---|---|---|---|---|---|---|
| NLGI Grade | – | 000 | 00 | 0 | 1 | 2 | 3 |
| Thickener type | – | Lithium | |||||
| Appearance | Visual | Smooth & Homogenous | |||||
| Color | Visual | Yellow to Brown | |||||
| Work Penetration @25°C | ASTM D217 | 445-475 | 400-430 | 355-385 | 310-340 | 265-295 | 220-250 |
| Copper Strip Corrosion, 24hrs @100°C | ASTM D4048 | 1b max. | 1b max. | 1b max. | 1b max. | 1b max. | 1b max. |
| Dropping Point °C, Min | ASTM D2265 | N/A | N/A | N/A | 190 | 190 | 190 |
| Water Washout resistance %Wt. @79°C | ASTM D1264 | N/A | N/A | N/A | Max 10 | ||
| Four Ball Weld Load, Kgf, Min | ASTM D2596 | 200 | |||||
| Operating Temperature Range, °C | INTERNAL | -25 to 130 | |||||
| Base Oil Viscosity @40°C (Cst) | ASTM D445 | 90-110 | |||||
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).