LITHIUM COMPLEX EP 220 GREASE
PRODUCT DESCRIPTION
Lithium Complex EP grease is made from high viscosity index mineral oils and performance additives to enhance extreme pressure, anti-wear, anti-corrosion and anti-oxidation properties. This grease is recommended for bearings operating under the load at high temperatures. This product is also suitable for use in applications such as continuous casting, quarries, breakers, roller conveyors and automotive wheel bearings.
APPLICATION
Lithium Complex EP is recommended for bearings operating under the load at high temperatures. It is also suitable for use in applications such as continuous casting, quarries, breakers, roller conveyors and automotive wheel bearings.
PRODUCT ADVANTAGES
- The operating temperature range is from -25°C to 140°C
- Excellent mechanical stability under vibrating conditions
- Excellent extreme pressure properties
- Excellent wear resistance
- High dropping point
- Good corrosion protection
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PARAMETERS | TEST METHODS | TYPICAL VALUE | ||
|---|---|---|---|---|
| NLGI Grade | – | 1 | 2 | 3 |
| Thickener type | – | Lithium complex | Lithium complex | Lithium complex |
| Appearance | Visual | Smooth & Homogenous | Smooth & Homogenous | Smooth & Homogenous |
| Color | Visual | Blue / Red / Natural | ||
| Work Penetration @25°C | ASTM D217 | 310-340 | 265-295 | 220-250 |
| Copper Strip Corrosion 24hrs @100°C | ASTM D4048 | 1b max. | 1b max. | 1b max. |
| Dropping Point °C, Min | ASTM D2265 | 240 | 240 | 240 |
| Water Washout Resistance %Wt @79°C | ASTM D1264 | max 5 | max 5 | max 5 |
| Four Ball, Load Wear Scar, Mm | ASTM D2266 | 0.6 | 0.6 | 0.6 |
| Four Ball Weld Load, Kgf, Min | ASTM D2596 | min 250 | min 250 | min 250 |
| Wheel Bearing Leakage After 6hrs @105°C, gm | ASTM D1263 | max 8 | max 8 | max 8 |
| Oil Separation, % 30hrs @100°C | ASTM D6184 | max 5 | max 5 | max 5 |
| Operating Temperature Range, °C | INTERNAL | -25 to 140 | ||
| Base Oil Viscosity @40°C (Cst) | ASTM 445 | 220 | 220 | 220 |
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).