POLYUREA GREASE NLGI-1.5 Mineral oil based
PRODUCT DESCRIPTION
Polyurea grease NLGI 1.5 is an extreme-pressure grease designed to give enhanced lubrication in loaded low to medium-speed industrial bearings, especially in continuous steel casting lines. It is also recommended for the lubrication of high-temperature slow-moving concast bearings in the steel industry. It can also be used in hightemperature, slow-moving bearing applications.
APPLICATION
Polyurea grease NLGI 1.5 is designed to give enhanced lubrication in loaded low to medium-speed industrial bearings, especially in continuous steel casting lines. It is also recommended for the lubrication of hightemperature, slow-moving concast bearings in steel industry.
PRODUCT ADVANTAGES
- The operating temperature range is -10°C to +150°C
- Outstanding high-temperature oxidation stability
- Good anti-corrosion properties
- Excellent resistance against water washout
- Long operational life
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PROPERTIES | TEST METHODS | TYPICAL VALUE |
|---|---|---|
| NLGI Grade | ASTM D217 | 1.5 |
| Thickener type | – | Di- Urea |
| Base Oil type | – | Mineral |
| Appearance | Visual | Smooth & Homogenous |
| Color | Visual | Light Brown |
| Worked Penetration, 0.1mm | ASTM D217 | 305 |
| Dropping Point, °C, Min | ASTM D2265 | 250 |
| Cu corrosion | ASTM D4048 | 1b |
| Four Ball Weld Load, Kgf | ASTM D2596 | min 250 |
| Emcor Rust Test, Rating | IP 220 | 0-0 |
| Heat Stability, %Wt | ASTM D6184 | 3 max |
| Operating Temperature Range °C | INTERNAL | -10 to 150 |
| Base Oil Viscosity @40°C (Cst) | ASTM D445 | 460 |
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).