LITHIUM COMPLEX EP VG460 GREASE SYNTHETIC
PRODUCT DESCRIPTION
Lithium Complex VG 460 EP Synthetic Grease is a high-performance, semi-fluid extreme pressure (EP) grease formulated with lithium complex thickener and PAO synthetic base oils for superior performance in demanding conditions. It is fortified with polymers, anti-wear additives, tackiness agents, and rust and oxidation inhibitors to deliver excellent load-carrying capacity, strong adhesion, and long-lasting protection. This advanced formulation ensures reliable lubrication, enhanced mechanical stability, and consistent performance, even in extremely low temperatures where smooth flow and efficiency are critical.
APPLICATION
Lithium Complex VG 460 EP Synthetic Grease is primarily used in on-road and off-road vehicles for lubricating wheel end bearings in trucks and trailers. It is also suitable for leaky gearboxes and heavy-duty equipment operating in extremely cold environments where standard greases may fail. This grease is recommended for NLGI 00 grade applications, including pressurized automatic and centralized lubrication systems with long feed lines, ensuring smooth grease flow, reliable delivery, and consistent protection under low-temperature conditions.
PRODUCT ADVANTAGES
- The operating temperature range is from -30°C to 150°C
- Truck and trailer wheel end bearings where NLGI 00 greases are specified
- Recommended for industrial plain and anti-friction bearings operating at high speed
- Good oxidation stability
- Where ultra-low temperatures limit the mobility and pumpability of heavier grades of grease
PACKAGING:
250gm, 500gm, 1kg, 3kg, 5kg, 10kg, 15kg, 180kg
TYPICAL PROPERTIES:
| PARAMETERS | TEST METHODS | TYPICAL VALUE |
|---|---|---|
| NLGI Grade | – | 00 |
| Thickener type | – | Lithium complex |
| Appearance | Visual | Smooth & Homogenous |
| Color | Visual | Ivory |
| Base Oil Type | – | Synthetic |
| Work Penetration @25°C | ASTM D217 | 400-430 |
| Copper Strip Corrosion For 24hrs @100°C | ASTM D4048 | 1b |
| Dropping Point °C, Min | ASTM D2265 | 240 |
| Water Washout Resistance %Wt @79°C | ASTM D1264 | N/A |
| Four Ball Weld Load Kgf, Min | ASTM D2596 | min 315 |
| Emcor Rust Protection Rating | ASTM D6138 | 1/1 |
| Operating Temperature Range °C | INTERNAL | -30 to 150 |
| Base Oil Viscosity @40°C (Cst) | ASTM D445 | 460 |
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil and grease may cause skin disorders. Avoid contact. Wash immediately with soap and water. For further information on Safety Guidelines please refer to MSDS available on our website www.rexol.uk
HEALTH & SAFETY:
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet at www.rexol.uk
PROTECT THE ENVIRONMENT:
Take used oil and grease to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil, or water.
STORAGE & HANDLING:
We recommend storing all packages under cover. Never leave grease containers improperly covered, uncovered, or open. Keep them tightly sealed between uses. If the containers are stored outside, a heavy canvas tarpaulin, plastic sheet, or lean-to can be used to keep off water or dirt. Ideally, grease should be stored in a cool, dry indoor area that does not exceed 86 degrees °F (30 degrees °C) and remains above 32 degrees °F (°C).